Safety is everything, and it all starts with wearing the right life jacket.
Florida, otherwise known as the Sunshine State, has some of the best sparkling water in the nation, making it the perfect place for watersports and boat days. Over 18% of the state is water, Florida has everything from lakes to shoreline. But, spending the day out on the Florida shores is only a good thing if it’s done safely — and that’s where life jackets come in.
Whether you’re on a jetski or relaxing on a boat, we recommend you wear a life jacket. In the state with some of the highest numbers of recreational boats in the nation, it’s important to stay safe. Here is everything you need to know about Florida’s life jacket laws:
Who is required to wear a life jacket in Florida?
- Children under 6 years of age while on any vessel less than 26 feet
- Each person onboard a personal watercraft
- Anyone being towed behind a vessel
Children under 6 years of age on a vessel greater than 26 feet are exempt from Florida’s life jacket law.
Why should I wear life jackets in Florida?
While everyone may not legally be required to wear a life jacket in Florida, if the temperature changes, the current changes or hidden hazards arise, even the best swimmer can benefit from wearing a life jacket.
According to the National Park Service, the top cause of death in national parks is drowning. Most drowning deaths occur close to shore and within close proximity to a life jacket. The NPS recommends that everyone wear a life jacket, no matter what water activity is being engaged in. By ignoring safety precautions, you are putting yourself and others at risk.
For pet owners — if you bring your pup on board, make sure they are also protected. Animal life jackets are a great investment for your pet and are a surefire way to ensure safety.
Fines for non-compliance
Violation of life jacket laws in Florida is a non-criminal infraction and can incur a fine of $50-$80 depending on the county.
Who enforces life jacket laws?
Life jacket and marine laws in Florida are enforced by the Law Enforcement division of the Florida Fish and Wildlife Commission.
Life jacket requirements in Florida
Life jacket laws in Florida require wearers to use Coast Guard-approved life jackets, and at least one Coast Guard-approved life jacket must be available to each passenger on the vessel. Appropriate life jackets should be the right size for the wearer, readily accessible and be maintained in good condition.
All life jackets must be:
- Serviceable: fully functional and free of rots, tears, punctures, rips, etc.
- Readily accessible: each person on board should know where to find their life jackets, and they should be easy to get ahold of
- Right Size: the appropriate size for everyone on board
What are the different types of life jackets?
Life jackets — which used to fall in the category of Personal Flotation Devices (PFD’s) in the states — come in several classifications that have changed and evolved. While the classification process is now different, life jackets classified by type are still allowed and approved by the Coast Guard, as long as they’re in good condition.
By knowing the different classifications, you’ll be able to pick out the perfect life jacket for you and your needs.
Old US Life Jacket Terminology
Though now known as the old labeling system, types were considered a great way to label life jackets in the past. Life jackets and PFD’s with these older labels — the type labels — are still fine to use and are approved, but they are being phased out and replaced with new labels as time goes on.
Type I PFD’s – Inherently Buoyant: Type I Personal Flotation Devices are good for every kind of water condition, from the calmest of waves to the roughest of waters. They’re not a lightweight type of life jacket, but their bulkier build makes them incredibly buoyant. When wearing a Type I PFD, most unconscious individuals will be turned face-up.
Inflatable Type I PFD Minimum Buoyancy: a minimum of 33.7 lb
Foam Type I PFD Minimum Buoyancy: a minimum of 22.5 Ibs
Type II PFD’s – Near-Shore Buoyant Vests: Type II PFD’s are meant for wearers that will be boating close to shore in locations where there is a high chance of a quick rescue. Type II PFD’s are also wearable for long days of water and land adventures, still being buoyant while not super bulky.
Inflatable Type II PFD Minimum Buoyancy: a minimum of 33.7 lb
Foam Type II PFD Minimum Buoyancy: a minimum of 15.5 lb
Type III PFD’s – Flotation Aids: Also known as inshore buoyant vests, Type III PFD’s are meant for situations in which the wearer can see the shore and the waters are relatively calm. Type III PFD’s, are designed with swimming and recreational boating activities and water-sports in mind.
Inflatable Type III PFD Minimum Buoyancy: a minimum of 22.5 lb
Foam Type III PFD Minimum Buoyancy: a minimum of 15.5 lb
Type IV PFD’s – Throwable Devices: Type IV PFD’s aren’t life jackets but are designed to be thrown to a person needing rescue in the water (such as a buoyant ring, a life ring, etc).
Throwable Device Type IV PFD Minimum Buoyancy: A minimum of 16.5 lb
Type V PFD’s – Special-Use Devices: Type V PFD’s are specially designed for specific uses. From devices used to prevent hypothermia, or for rescue operations to those meant for kayaking, Type V PFD’s must be used according to their specifications. Some of these devices are not approved for certain activities, or must be worn to be approved for use.
Minimum buoyancy: Depends on specific PFD
New US Life Jacket Terminology (Performance System)
While life jackets categorized by type are still approved for use as long as they’re in good condition, the new US classification system for life jackets relies on performance categories.
Inherent Life Jackets: These devices are always buoyant (usually made of foam) and meant to float immediately without any action required by the wearer. They are adjustable, they are typically in vest form and they are of an accessible price and maintenance standard.
Inherent wearable life jackets are offered in a variety of performance levels, making them a great choice for most activity levels and environments.
Inflatable Life Jackets: These devices inflate with air (usually with an installed gas canister) and are activated when the wearer pulls the tube to inflate them. Inflatables come in a variety of performance levels, but are never recommended for weak or non-swimmers, children or those on personal watercraft.
Inflatable life jackets are also low bulk until inflated, making them a great option for constant wear.
Hybrid or Multi-Chamber Devices: These devices combine inherent material like foam along with an inflatable chamber. As Hybrid devices, these typically perform with full buoyancy without inflation, and inflation adds additional performance that can sometimes even include turning and freeboard.
However, Hybrid wearers must be aware of the ability of the device they wear to stand up to their performance. Some of these devices do not offer maximum buoyancy until inflated.
Special Purpose: These devices are meant for specific activities or restricted circumstances, and they often require extra training or action by the wearer. This classification lends itself to extra buoyancy for white water rafting or providing additional visibility, inflatable belt pouches or manual inflation devices.
New Performance System Label Icons
New life jacket labels will feature an icon and number to indicate the intended conditions for use. The numbers range from Level 50 – Level 275, with smaller level life jackets intended for use in calm water and close-to-shore scenarios, and higher level life jackets which are ideal for rougher waters, and situations where rescue may take longer.
Level 50: This performance level is recommended for users who have strong swimming skills, and are best for close-to-shore scenarios where immediate assistance is available. Life jackets of this type will not turn the wearer face-up in the water.
Level 70: This performance level is recommended for calm or sheltered waters that are close to shore, and where help is nearby. They will not turn the wearer face up in the water.
Level 100: This performance level is also recommended for use in calm waters, however they will provide enough flotation that the wearer will have more time to wait for rescue. They have some turning ability, but will not always turn the wearer face up.
Level 150: Devices of this performance level are more buoyant and are appropriate for off-shore scenarios, and will turn the wearer face up in the water.
Level 275: Devices with a 275 performance rating are the most buoyant and are designed for offshore emergency rescue situations. They can be used by SAR crews, and will handle the additional weight of tools, equipment, or clothing.
New life jacket labels will also feature a warning panel. This panel will include important information about the device and it’s intended use, in addition to indicating activities that are not recommended for the performance level of the device such as water-skiing, towed sports, and personal watercraft operation.
How to fit life jackets properly
Life jackets should be snug, comfortable, adjustable and unable to rise above the wearer’s ears. Each person should wear a life jacket meant for their size, weight and body type and intended for the situation that the wearer will be in.
These keys will help you to adjust your life jacket properly:
- Put on a life jacket and make sure all pieces are fastened and zipped loosely, adjusting from there
- After zipping up the life jacket, tighten from the bottom first and work your way up. Make sure that the bottom clasp is snapped in place
- Adjust each side adjustment to make a snug fit, and keep them even so that your life jacket doesn’t ride up on one side
- Tighten the shoulder straps last
- Once adjusted, raise hands above the head. If a life jacket rises above the wearer’s chin or feels incredibly tight, adjust it for another size. The wearer should be able to move in the life jacket comfortably
- When possible, do a fit-test in the water. Float onto your back to ensure the life jacket doesn’t ride up, slip over your head and keeps you afloat
Life jacket best practices
Life jackets must be adequately maintained to ensure that they’ll work when needed. If you store and maintain your life jackets, they can last you for many seasons.
Here are our tips for storing and maintaining life jackets so that they last:
- Wipe life jackets down with a gentle cleanser specifically made for life jackets
- Let the life jackets drip-dry then store in a well-ventilated area
- Check life jackets each season for any loose fastenings, rips or tears
Note: Do not lay jackets in direct sunlight or heat, as this can eventually affect their buoyancy.
Safety is everything to us at BOATsmart!. Make sure that every boat and personal watercraft operator is legally — and responsibly — able to be on the water. In Florida, everyone born after January 1, 1988, must have a Boating Safety ID Card to operate a boat of 10 horsepower or more legally. In addition, operators must have their photo ID.
By using BOATsmart! as your boating safety education provider, you’ll be prepared for any water adventure that comes your way. With animated and narrated lessons built to capture your attention and root in your memory, our courses are perfect for each boater’s age. As a Coast Guard and NASBLA-approved boating educator, we’re the best choice for an efficient, accredited and info-packed boating safety education course.
